For all products and sales
call 01793 611777

(2 compartment)
top 100mm, bottom 50mm

(2 compartment)
top 100mm, bottom 50mm

Factory manufactured sets

Pier sets and off sets can be pre made minimising
labour costs. A member of our technical staff could
advise and assist for all on-site measurements.

Should you require factory made sets without the need
of a site visit by our technical staff, dimensions of wall
as shown below will be required.

(3 compartment)
top 50mm, centre 100mm, bottom 50mm

(3 compartment)
top 50mm, centre 100mm, bottom 50mm
Flytec skirting trunking is supplied in
2 metre lengths, comprising a galvanised
sheet steel body with powder coated
overlapping lid, white as standard.
A cover strap is provided with each length
of lid. This reduces the necessity for special
on-site cutting requirements, the strap
covering any cut edges.

20mm knockouts are provided in the partition
at 250mm centres. This allows easy positioning
of outlet plates, which require screening via
the steel back box that fixes to the partition.

Chamfered or flat top options as standard.

Other powder coated finishes are available
even when only a short run of trunking is

2 or 3 compartments are most commonly used.
However systems to suit client's individual
requirements can be manufactured within the
same short lead times.

From 1st November 2018 Flytec will manufacture
TC62 and TF62 Skirting Trunking with the 100mm
Compartment at the top.
This is to facilitate the fitment of moulded plugs.

How to order

Accessory part numbers are the same for all
styles of skirting and dado. It is the
trunking part number pre-fixed before the
accessory that ensures you get the correct

Example: A twin socket outlet lid for 200mm
x 50mm, 3 compartment flat top skirting.
Take trunking reference TF82/3C + accessory
part number TSO to give TF82/3C TSO.

© Copyright 2016 - FLYTEC Systems Ltd, Unit 11, Techno Trading Estate, Bramble Road, Swindon, SN2 8HB
Flytec Systems Limited. Registered in England and Wales Number: 3783664