For all products and sales
call 01793 611777










Flytec flush floor trunking body is supplied
in 2 metre lengths complete with 2 x 1 metre
lengths of lid secured by means of flush, all
steel turnbuckle fasteners. Each length of
trunking is supplied with one external fitting
connector.


Lids are manufactured from 3mm thick galvanised
steel. They are fully removable and may be flush or
recessed by 3mm as standard. Other depths of recess
can also be supplied.


It is advisable that all lid sections are fitted during
screeding. This will prevent any slight inward
movement to the sides of trunking body.


We recommend that Flytec flush floor trunking is installed on a ribbon screed or similar to ensure support along the entire length and width of the system.
Service Outlet Box




Service outlet boxes are available for shallow screed trunking. The underside of the box must be set lower into the floor to enable cables to pass under the socket outlet plates whilst maintaining lids to finish level with screed.

Carpet trim and lid assembly are manufactured in a tough plastic moulding which has two individual hinged cable outlets colour dark grey. The lid is reinforced by a 3mm steel plate. Carpet recess is 6mm.

Additional sockets or a variation of plates can be supplied on request.
Junction Boxes and Accessories








© Copyright 2016 - FLYTEC Systems Ltd, Unit 11, Techno Trading Estate, Bramble Road, Swindon, SN2 8HB
Flytec Systems Limited. Registered in England and Wales Number: 3783664