For all products and sales
call 01793 611777





Flytec flush floor trunking is supplied in 2
metre lengths. 400mm lengths of removable
lid are fitted which are interchangeable with a service outlet box of the same length, thus
giving the designer flexibility of positioning
within a screeded floor installation.


Lids manufactured from 3mm thick galvanised
steel are fixed to the trunking body by
countersunk zinc plated steel turnbuckle fasteners,
providing speed of fitting by the installer and
maximum rigidity of the finished product.


Two or Three compartments available.

It is advisable that all lid sections are fitted
during screeding. This will prevent any slight
inward movement to the sides of the trunking body.


We recommend that Flytec flush floor trunking is installed on a ribbon screed or similar to ensure support along the entire length and width of the system.






D6 Flush Floor Trunking Accessories







D6 Flush Floor Service Boxes



2-compartment service box designed to fit
into the trunking anywhere along the system layout
excluding junction points.
Part number D6/C15-SB/1TS.


Supplied with one RJ45 plate and a panel
mounted dual earth twin switched sovket.










3-compartment service box designed to fit
into the trunking anywhere along the system layout
excluding junction points.
Part number D6/C16-SB/1TS.


Supplied with one RJ45 plate, a blank plate
and a panel mounted dual earth twin switched
socket.


Additional sockets or a variation of plates
can be supplied on request.


Carpet trim and lid assembly manufactured in
a tough plastic moulding which has two individual
hinged cable outlets colour dark grey. The
lid is reinforced by a 3mm steel plate.
Carpet recess is 6mm.

© Copyright 2016 - FLYTEC Systems Ltd, Unit 11, Techno Trading Estate, Bramble Road, Swindon, SN2 8HB
Flytec Systems Limited. Registered in England and Wales Number: 3783664